产品中心
产品查询/报价
您的姓名
学校/机构及部门名称
联系方式
查询产品
留言内容
提交

P-30 Vertical Micropipette Puller

Vertical Micropipette Puller

0.00
0.00
Sutter Model.:
Brand:
  
产品简介

Vertical Micropipette Puller


The model P-30 vertical micropipette puller is designed for the fabrication of basic micropipettes and patch-type pipettes. It will pull micropipettes with tip diameters as small as 0.3µm and moderate taper lengths (6 to 10mm). By using an included patching attachment, the P-30 will pull the standard double pull patch-type pipette. Used with thin wall glass capillaries, it will generate pipettes or needles suitable for microinjection studies. The P-30 is ideal for student laboratories and other situations which call for an economical, reliable pipette pulling device.

The P-30 is available with either a platinum/iridium or a Nichrome filament. The Nichrome filament is suitable for many applications and is not prone to damage.The Platinum filament is more efficient at heating and cooling, and, although is more prone to damage than the Nichrome filament, the platinum filament is recommended for thick wall and aluminosilicate glass and applications requiring shorter taper lengths.

COMMON APPLICATIONS P-30

  • C. elegans
  • Xenopus
  • Drosophilia microinjection
    FEATURES
  • Pulls electrodes with tip diameters down to 0.3µm, consistently and reliably.
  • A micrometer allows precise reproducibility of trip point settings in producing fine microelectrodes.
  • Full three digit digital controls for accurate setting of heat and pull values.
  • Constant current power supplies for filament and pull solenoid.
  • Enclosed front to reduce variability caused by drafts.
  • Dual (manually) switched heat settings for patch pulling or two different types of micropipettes.
  • All working parts are made from corrosion resistant material.
  • Two heating assemblies available; platinum/iridium (recommended) or Nichrome coil.
  • Built-in RFI filter and dual voltage/dual frequency operation.
  • Rubber padded jaws to minimize breakage of capillary tubing.
  • Designed to take up a minimum of bench space.
  • Slope of the front panel aids in preventing glass from entering cabinet/solenoid mechanism.

TECHNICAL SPECIFICATIONS

Dimensions
18in x 10in x 9in | 46cm x 25cm x 23cm

Weight
35 lbs | 16 kg

Electrical
115/230 volts | 50/60 Hertz power line

CE Certificate




          

客服中心

Hotline / 热线电话

中国: 020-87357737

9:00 AM - 18:00 PM


香港: 852-27239888

9:30 AM - 18:30 PM